Features of the Operation of Anchor Plates for Fixing Windows under the Action of Wind Loads

Number of journal: 12-2023
Autors:

Konstantinov A.P.,
Aksenov I.S.

DOI: https://doi.org/10.31659/0044-4472-2023-12-3-7
УДК: 692.82

 

AbstractAbout AuthorsReferences
Numerical and laboratory studies have been carried out to study the static operation of anchor plates under the action of wind loads. Numerical studies of the operation of a standard anchor plate under the action of a compressive load acting perpendicular to the plane of the window have shown that its carrier is several times less than the force that occurs at the attachment points of window blocks when peak wind loads are applied to them. At the same time, the existing experience in the operation of window blocks shows that anchor plates in the vast majority of cases retain their bearing capacity throughout the entire working life of the window block. This indicates that the simplified design scheme of the anchor plate used in practice does not fully reflect its actual operation as part of the window structure. This statement was verified during laboratory tests of a window block with typical design fixed with anchor plates to a frame that simulates a window opening. It is established that the static operation of the anchor plate is significantly influenced by both the fastening of the window frame with mounting foam and the limitation of anchor plates deformations by window slopes. The issue of calculating anchor plates for the effect of wind loads should be considered by the professional community in order to develop both common approaches to the calculation of such fasteners and the fundamental possibility of their use for windows installation, especially in unique buildings.
А.P. KONSTANTINOV, Candidate of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.),
I.S. AKSENOV, Engineer (This email address is being protected from spambots. You need JavaScript enabled to view it.)

National Research Moscow State University of Civil Engineering (26, Yaroslavskoe Highway, Moscow, 129337, Russian Federation)

1. Kalabin V.A. Assessment of PVC profile thermal deformation. Part 1. Winter transverse deformations. Svetoprozrachnye konstrukcii. 2013. No. 1–2, pp. 6–9. (In Russian).
2. Kalabin V.A. Assessment of PVC profile thermal deformation. Part 2. Summer transverse deformations. Svetoprozrachnye konstrukcii. 2013. No. 3, pp. 12–15. (In Russian).
3. Kalabin V.A. Assessment of PVC profile thermal deformation. Рart 3. The intensity of direct solar radiation. Svetoprozrachnye konstrukcii. 2013. No. 4, pp. 34–38. (In Russian).
4. Aksenov I.S., Konstantinov A.P. An analytical method for calculating the stress-strain state of PVC window profiles under thermal loading. Vestnik MSUCE. 2021.Vol. 16. No. 11, pp. 1437–1451. (In Russian). DOI: 10.22227/1997-0935.2021.11.1437-1451
5. Aksenov I.S. and Konstantinov A.P. Temperature deformations of PVC window profiles with reinforcement. International Journal for Computational Civil and Structural Engineering. 2022. Vol. 18, No. 2, pp. 98–111. DOI: 10.22337/2587-9618-2022-18-2-98-111
6. Konstantinov A., Lambias Ratnayake M. Calculation of PVC windows for wind loads in high-rise buildings. E3S Web of Conferences. 2018. Vol. 33. 02025. https://doi.org/10.1051/e3sconf/20183302025
7. Galyamichev A.V. Wind load and its action on facade structures. Stroitel’stvo unikal’nyh zdanij i sooruzhenij. 2017. No. 9 (60), pp. 44–57. (In Russian). DOI: 10.18720/CUBS.60.4
8. Prevat D.O. Wind load design and performance testing of exterior walls: Current standards and future considerations. Performance of exterior building walls. ed. P. Johnson (West Conshohocken, PA: ASTM International, 2003), pp. 17–41. DOI: 10.1520/stp10925s
9. Melnikova I., Boriskina I. Modern translucent structures in multistory residential buildings. IOP Conference Series: Materials Science and Engineering. 2018. 022021. DOI: 10.1088/1757-899X/365/2/022021
10. Konstantinov A.P., Semenov V.S. Strength and deformation characteristics of modern PU-foams economy class. Stroitel’nye Materialy [Construction Materials]. 2019. No. 3, pp. 28–32. (In Russian). DOI: https://doi.org/10.31659/0585-430X-2019-768-3-28-32
11. Larin O.A., Kashurkin A.Yu., Mitrofanova N.V., Fedchenko E.V. Investigation of the resistance to operational impacts of sets for structural glazing of facades. Stroitel’nye Materialy [Construction Materials]. 2022. No. 7, pp. 57–62. (In Russian). DOI: https://doi.org/10.31659/0585-430X-2022-804-7-57-62

For citation: Konstantinov A.P., Aksenov I.S. Features of the operation of anchor plates for fixing windows under the action of wind loads. Zhilishchnoe Stroitel’stvo [Housing Construction]. 2023. No. 12, pp. 3–7. (In Russian). DOI: https://doi.org/10.31659/0044-4472-2023-12-3-7


Print   Email