Current Industrial Technology for Manufacturing Non-Stressed and Pre-Stressed Structures. Modernization of Large-Panel Prefabrication Plants

Flexible architectural solution for construction of housing, industrial and social objects can be a combination of the existing construction technologies: large-panel housing construction with the use of precast-monolithic frame with single-layer and three-layer floor slabs with a width of from 1 m to 4 m and a length of 7.65 m. The experience of GK “RECON-SMK” (SMK – precast-monolithic frame) in the development of energy-efficient industrial technology of precast-monolithic frame (SMK technology), which has commissioned over 100 universal technological lines with a capacity of 15 to 200 thousand m² of total area per year, as well as pallets for construction industry plants in fifty regions of the Russian Federation, the Republic of Belarus and the Republic of Kazakhstan, is presented. The creation of SMK technology is an example of the implementation of intersectoral cooperation of the construction materials and engineering industries based on Russian scientific developments and adapted modern foreign technologies. Specialists of GK “RECON-SMK” are constantly improving the Russian stand technology of precast-monolithic frame and its application in large-panel housing construction. The current data for determining the optimal capacity of the enterprise is provided. Supply of reinforced concrete products to other regions due to increased transport costs, which can be up to 90% of the cost of production, makes the production of building materials unprofitable.

V.A. SHEMBAKOV, Head of GK “REKON-SMK”, General Director of ZAO “Rekon”, RF Honored Builder, Head of the Author 's Team for the development and implementation of SMK technology (This email address is being protected from spambots. You need JavaScript enabled to view it.)

ZAO “Rekon” (20a Dorozhny Proezd, Cheboksary, 428003, Chuvash Republic, Russian Federation)

1. Kozelkov M.M., Lugovoi A.V. Analysis of the basic regulatory legal documents in the field of designing and construction for recycling. Vestnik NIC “Stroitel’stvo”. 2017. No. 4 (15), pp. 134–145. (In Russian).
2. Sokolov B.S., Zenin S.A. Analysis of the regulatory base for designing reinforced concrete structures. Stroitel’nye Materialy [Construction Materials]. 2018. No. 3, pp. 4–12. (In Russian).
3. Nikolaev S.V. Renovation of housing stock of the country on the basis of large-panel housing construction. Zhilishchnoe Stroitel’stvo [Housing Construction]. 2018. No. 3, pp. 3–7. (In Russian).
4. Shembakov V.A. Sborno-monolitnoe karkasnoe domostroenie [Combined and monolithic frame housing construction]. Cheboksary, 2013.
5. Shembakov V.A. Possibilities to use the russian technology of precast-monolithic frame for construction of qualitative affordable housing and roads in Russia. Stroitel’nye Materialy [Construction Мaterials]. 2017. No. 3, pp. 9–15. (In Russian).
6. Nikolaev S.V. Innovative Replacement of Large-Panel Housing Construction by Panel-Monolithic Housing Construction (PMHC). Zhilishchnoe Stroitel’stvo [Housing Construction]. 2019. No. 3, pp. 3–10. DOI: https://doi.org/10.31659/0044-4472-2019-3-3-10 (In Russian).
7. Manukhina O.A., Rybko V.S., Romanov N.R. Monolithic construction: problems and prospects. Ekonomika i predprinimatel’stvo. 2018. No. 4 (93). (In Russian).
8. Lekarev I.N., Sidorov A.G., Moshka I.N. Series of ABD Houses – 9000: Introduction of BIM-Technologies at Modern Production. Stroitel’nye Materialy [Consrtruction Materials]. 2016. No. 3, pp. 22–24. (In Russian).
9. Pilipenko V.M. Industrial housing construction in the Republic of Belarus at a new qualitative level. Zhilishchnoe Stroitel’stvo [Housing Construction]. 2019. No. 3, pp. 14–19. DOI: https://doi.org/10.31659/0044-4472-2019-3-14-19 (In Russian).
10. Shapiro G.I., Gasanov A.A. The numerical solution of a problem of stability of the panel building against the progressing collapse. International Journal for Computational Civil and Structural Engineering. 2016. Vol. 12. Iss. 2, рp. 158–166. (In Russian).
11. Shapiro G.I., Zenin S.A., Sharipov R.Sh., Kudinov O.V. Rationing in large-panel housing construction: the new set of rules on design of large-panel constructive systems. Promyshlennoe i grazhdanskoe stroitel’stvo. 2018. No. 2, pp. 10–15. (In Russian).
12. Fedorova N.V., Savin S.Yu. Ultimate State Evaluating Criteria of RC Structural Systems at Loss of Stability of Bearing Element. IOP Conf. Series: Materials Science and Engineering. 2018, 463, pp. 1–7. (In Russian).
13. Pavlenko D.V., Shmelev S.E., Kuznetsov D.V., Sapronov D.V., Fisenko S.S., Damrina N.V. Universal system of prefabricated housing construction RB-South – from the idea to implementation on the construction site. Stroitel’nye Materialy [Construction Materials]. 2019. No. 3, pp. 4–10. DOI: https://doi.org/10.31659/0585-430X-2019-768-3-4-10 (In Russian).
14. Kalabin A.V., Kukovyakin A.B. Mass housing estate: problems and prospects. Akademicheskii vestnik UralNIIproekt RAASN. 2017. No. 3 (34), pp. 55–60. (In Russian).
15. Trishchenko I.V., Kastornykh L.I., Fominykh Yu.S., Gikalo M.A. Evaluation of effectiveness of investment project of reconstruction of large-panel housing construction enterprises. Zhilishchnoe Stroitel’stvo [Housing Construction]. 2018. No. 10, pp. 39–43. (In Russian).